Homogeneous Reactor/Hydrothermal Reaction Rotary Oven
The Homogeneous Reactor is used on reaction test for the same group of media under different conditions or the different group of media under same conditions.
The homogeneous reactor is composed of cabinet body, rotating parts, heater and controller. The cabinet body is made of stainless steel. The rotating system consists of motor gear box and rotary support. The control system mainly controls the cabinet temperature and rotating speed. The homogeneous reactor used multiple hydrothermal synthesis reactor vessels to test the same group of media under different conditions or the different group of media under same conditions. Due to the rotating shaft, the medium in the reactor vessel is fully stirred, so the reaction speed is fast and reaction is fully and thoroughly, which is better than the simple thermostatic effect. The casing on the stirring rod is equipped with a retainer ring (according to the size of the reaction vessel), can be fixed micro reaction vessel 6,8,10,12, at the same time, can be customized according to user requirements. In general, the cabinet body size is 400*400*450mm, and the inside of the cabinet can be filled with 8 pieces 100ML reactor vessel. The specific size is subject to the customer’s demand.
Technical parameter
| Hydrothermal Synthesis Reactor Unit | |
| Model | ZP-4/6/8/12 |
| Working Voltage | 220×(1±10%)V, AC 50Hz/60Hz |
| Design Temperature | 300℃ |
| Operating Temperature | ≤200℃ (Teflon inner vessel) |
| Temperature Fluctuation | ±0.5℃ |
| Motor Speed | 0-70r/min |
| Material | 304 Stainless Steel |
| Retainer rings | 4/6/8/12 |
| Control System | Side control box |
What’s the Homogeneous Reactor?
Homogeneous Reactor is used on reaction test for the same group of media under different condition or the different group of media under same conditions. It is made of stainless steel and double-toughened glass, the test process is continuously circulated in the close environment, in this case, the temperature in the cabinet becomes equal as well.
Three-dimensional Rotating Shaft
Hydrothermal synthesis reactor
Motor
Our Advantage of Hydrothermal Synthesis Reactor Unit?
1. Our product is made of stainless steel, which can avoid any rust or corrosion.
2. The rotating shaft makes the reaction speed fast, fully and thoroughly, which is better than the simple thermostatic effect.
3. The high quality high temperature resistance handle can avoid any scald efficiently.
Related products
-
Catalyst evaluation system
This system is mainly used for the performance evaluation of palladium catalyst in hydrogenation reaction and the exploration test of process conditions. Basic process: The system provides two gases, hydrogen and nitrogen, which are respectively controlled by a pressure regulator. The hydrogen is metered and fed by a mass flow controller, and the nitrogen is metered and fed by a rotameter, and then passed into the reactor. The continuous reaction is carried out under...
-
High Temperature & High Pressure Magnetic ...
Product description 1. ZIPEN offers HP/HT reactors are applicable for pressure under 350bar and temperature up to 500 ℃. 2. The reactor can be made of S.S310, Titanium, Hastelloy, Zirconium, Monel, Incoloy. 3. Special sealing ring is used according to operational temperature and pressure. 4. A safety valve with rapture disc is equipped on the reactor. the blasting numerical error is small, the instantan...
-
Hydrothermal Synthesis Reactors
The hydrothermal synthesis reactor unit can be used to test the same group of media under different conditions or the different group of media under same conditions. The hydrothermal synthesis reactor unit is composed of cabinet body, rotating system, heating system and control system. The cabinet body is made of stainless steel. The rotating system consists of motor, gear box and rotary support. The control system mainly controls the cabinet temperature and rotating...
-
Experimental nitrile latex reaction system
Basic Process Butadiene in the raw material tank is prepared in advance. At the beginning of the test, the system is vacuumed and replaced with nitrogen to ensure that the entire system is oxygen-free and water-free. Prepared with various liquid-phase raw materials and initiators and other auxiliary agents are added to the metering tank, and then the butadiene was transferred to the metering tank. Open t...
-
Ceramic Ball
Product description Specification 10 Φ / AL2O3 content ≥40% AL2O3+SiO2 ≥92% Fe2O3 content ≤1% Compressive strength ≥0.9KN/pc Heap proportion 1400kg/m3 Acid resistance ≥98% Alkali resistance ≥85% Ceramic ball mainly uses a-Al2O3 superior grade alumina mixed with a small amount of rare earth metal oxides as raw materials. After strict scientific formula, raw material selection, fine g...
-
Polymer polyols (POP) reaction system
Product Description This system is suitable for continuous reaction of gas-liquid phase materials under high temperature and high pressure. It is mainly used in the exploration test of POP process conditions. Basic process: two ports are provided for gases. One port is nitrogen for safety purge; the other is air as power source of pneumatic valve. The liquid material is accurately metered by an electroni...
