Top Suppliers Pharmaceutical And Chemical Hydrothermal Reactor - Hydrothermal Synthesis Reactors – Zipen
Top Suppliers Pharmaceutical And Chemical Hydrothermal Reactor - Hydrothermal Synthesis Reactors – Zipen Detail:
The hydrothermal synthesis reactor unit can be used to test the same group of media under different conditions or the different group of media under same conditions.
The hydrothermal synthesis reactor unit is composed of cabinet body, rotating system, heating system and control system. The cabinet body is made of stainless steel. The rotating system consists of motor, gear box and rotary support. The control system mainly controls the cabinet temperature and rotating speed. The hydrothermal synthesis reactor unit used multiple hydrothermal synthesis reactor vessels to test the same group of media under different conditions or the different group of media under same conditions. Due to the rotating shaft, the medium in the reactor vessel is fully stirred, so the reaction speed is fast and the reaction is fully and thoroughly, which is better than the simple thermostatic effect.
What’s the features of the stainless steel hydrothermal synthesis reactor unit?
Features
1. Motor Speed: 0-70r/min, Variable frequency.
2. Tank Volume: 10-1000mll.
3. Max. temperature: 300℃.
4. Tank material: 316 stainless steel.
5. Programmed temperature control; Side control box.
This is the most ideal device for chemical reactions under high temperature and high pressure.
Target customers
Laboratories in universities, research institutes, corporate.
What is the Stainless Steel Hydrothermal Synthesis Reactor Unit used for?
Catalytic reaction, polymerization reaction, supercritical reaction, high-temperature and high-pressure synthesis, hydrogenation reaction, hydrometallurgy, esterification reaction, perfume synthesis, slurry reaction Pentafluoroethyl iodide synthesis, ethylene oligomerization, hydrodesulfurization, hydrodenitrogenation, oxide hydrogenolysis, hydrodemetalization, unsaturated hydrocarbon hydrogenation, petroleum hydrocracking, olefin oxidation, aldehyde oxidation, liquid phase oxidation Impurity removal, catalytic coal liquefaction, rubber synthesis, lactic acid polymerization, n-butene isomerization reaction, hydrogen reaction, polyester synthesis reaction, p-xylene oxidation reaction.
Our advantage of stainless-steel hydrothermal synthesis reactor unit?
1. The reactor is made of stainless-steel with high corrosion resistance for low maintenance cost.
2. Different vessels are available.
3. Perfect for experiments in universities, research institutes, corporates.
Product detail pictures:
Related Product Guide:
It really is a good way to further improve our goods and service. Our mission would be to acquire inventive items to buyers with a very good encounter for Top Suppliers Pharmaceutical And Chemical Hydrothermal Reactor - Hydrothermal Synthesis Reactors – Zipen , The product will supply to all over the world, such as: Sevilla, Bahrain, Saudi Arabia, Our solutions have national accreditation requirements for qualified, good quality items, affordable value, was welcomed by individuals all over the world. Our goods will continue to improve inside the order and appear forward to cooperation with you, Really should any of those items be of interest to you, please letus know. We will be satisfied to provide you a quotation up on receipt of the detailed needs.
By Emma from Panama - 2018.12.11 11:26
Superb technology, perfect after-sales service and efficient work efficiency, we think this is our best choice.
By Madge from Australia - 2017.09.29 11:19
Related products
-
Free Sample For Titanium Reaction System - Pol...
Product Description This system is suitable for continuous reaction of gas-liquid phase materials under high temperature and high pressure. It is mainly used in the exploration test of POP process conditions. Basic process: two ports are provided for gases. One port is nitrogen for safety purge; the other is air as power source of pneumatic valve. The liquid material is accurately metered by an electronic scale and fed into the system by a constant flux pump. The material react firstly i...
-
2022 High Quality Nylon Experimental Unit - Ac...
Industry standard Our products conforms to HG/T 3927-2007 Properties of alumina special for hydrogen peroxide Crystal phase: γ-Al2O3 Specification (mm): 7～14 mesh Φ 3～5, Φ4～6, Φ5～7 Exterior: White ball granule Heap density (g/cm3): 0.68-0.75 Strength (N/grain): >50 Surface area (m2/g): 200～260 Pore volume (cm3/g): 0.40～0.46 Large hole (>750A): 0.14 Water absorption (%): >50 Application of activated alumina as adsorbent The main liquids that activated alumina can be dried are: a...
-
Ordinary Discount Lab Reactor - Hydrothermal S...
The hydrothermal synthesis reactor unit can be used to test the same group of media under different conditions or the different group of media under same conditions. The hydrothermal synthesis reactor unit is composed of cabinet body, rotating system, heating system and control system. The cabinet body is made of stainless steel. The rotating system consists of motor, gear box and rotary support. The control system mainly controls the cabinet temperature and rotating speed. The hydrothermal s...
-
Bottom Price Lab Small High Pressure Reactor -...
The reactor can be made of S.S 316, S.S304, Titanium, Hastelloy, etc. It can also be manufactured according to the materials specified by user. The design pressure is 120bar and the working pressure 100bar. The design pressure is 350℃, while working pressure is 300℃. Once the working temperature is over 300℃, the reactor will alarm and the heating process will stop automatically. We can also supply high pressure and high temperature reactors which are available for reaction with pressure hi...
-
Short Lead Time For Hydrogen Peroxide - DDI, C...
DDI is a unique aliphatic diisocyanate that can be combined with active hydrogen-containing compounds to prepare polymers. It is a long-chain compound with a 36-carbon dimerized fatty acid backbone. The main chain structure gives DDI superior flexibility, water resistance and low toxicity than other aliphatic isocyanates. DDI is a low-viscosity liquid, easily soluble in most polar or non-polar solvents. Because it is an aliphatic isocyanate, it has non-yellowing properties. What’s th...
-
Massive Selection For Ceramic Ball - Activated...
Industry standard Our products conforms to HG/T 3927-2007 Properties of alumina special for hydrogen peroxide Crystal phase: γ-Al2O3 Specification (mm): 7～14 mesh Φ 3～5, Φ4～6, Φ5～7 Exterior: White ball granule Heap density (g/cm3): 0.68-0.75 Strength (N/grain): >50 Surface area (m2/g): 200～260 Pore volume (cm3/g): 0.40～0.46 Large hole (>750A): 0.14 Water absorption (%): >50 Application of activated alumina as adsorbent The main liquids that activated alumina can be dried are: a...
