Super Purchasing For Bench Top Magnetic Stirred Reactor - Hydrothermal Synthesis Reactors – Zipen
Super Purchasing For Bench Top Magnetic Stirred Reactor - Hydrothermal Synthesis Reactors – Zipen Detail:
The hydrothermal synthesis reactor unit can be used to test the same group of media under different conditions or the different group of media under same conditions.
The hydrothermal synthesis reactor unit is composed of cabinet body, rotating system, heating system and control system. The cabinet body is made of stainless steel. The rotating system consists of motor, gear box and rotary support. The control system mainly controls the cabinet temperature and rotating speed. The hydrothermal synthesis reactor unit used multiple hydrothermal synthesis reactor vessels to test the same group of media under different conditions or the different group of media under same conditions. Due to the rotating shaft, the medium in the reactor vessel is fully stirred, so the reaction speed is fast and the reaction is fully and thoroughly, which is better than the simple thermostatic effect.
What’s the features of the stainless steel hydrothermal synthesis reactor unit?
Features
1. Motor Speed: 0-70r/min, Variable frequency.
2. Tank Volume: 10-1000mll.
3. Max. temperature: 300℃.
4. Tank material: 316 stainless steel.
5. Programmed temperature control; Side control box.
This is the most ideal device for chemical reactions under high temperature and high pressure.
Target customers
Laboratories in universities, research institutes, corporate.
What is the Stainless Steel Hydrothermal Synthesis Reactor Unit used for?
Catalytic reaction, polymerization reaction, supercritical reaction, high-temperature and high-pressure synthesis, hydrogenation reaction, hydrometallurgy, esterification reaction, perfume synthesis, slurry reaction Pentafluoroethyl iodide synthesis, ethylene oligomerization, hydrodesulfurization, hydrodenitrogenation, oxide hydrogenolysis, hydrodemetalization, unsaturated hydrocarbon hydrogenation, petroleum hydrocracking, olefin oxidation, aldehyde oxidation, liquid phase oxidation Impurity removal, catalytic coal liquefaction, rubber synthesis, lactic acid polymerization, n-butene isomerization reaction, hydrogen reaction, polyester synthesis reaction, p-xylene oxidation reaction.
Our advantage of stainless-steel hydrothermal synthesis reactor unit?
1. The reactor is made of stainless-steel with high corrosion resistance for low maintenance cost.
2. Different vessels are available.
3. Perfect for experiments in universities, research institutes, corporates.
Product detail pictures:
Related Product Guide:
Sticking to the principle of "Super Quality, Satisfactory service" ,We are striving to be a good business partner of you for Super Purchasing For Bench Top Magnetic Stirred Reactor - Hydrothermal Synthesis Reactors – Zipen , The product will supply to all over the world, such as: Zimbabwe, Yemen, Guatemala, Our company is working by the operation principle of "integrity-based, cooperation created, people oriented, win-win cooperation". We hope we can have a friendly relationship with businessman from all over the world.
By Elsa from Finland - 2018.07.26 16:51
Timely delivery, strict implementation of the contract provisions of the goods, encountered special circumstances, but also actively cooperate, a trustworthy company!
By Molly from Denmark - 2018.12.11 14:13
Related products
-
Wholesale Discount MIL-D-82675 – Hydrogen...
Specification TYPE II Stannum containing stabilizer Appearance Light yellow transparent liquid Density (20℃) ≥1.06g/cm3 PH value 1.0～3.0 Stabilizing effect on hydrogen peroxide the stability of hydrogen peroxide is increased from ≥ 90.0% to ≥ 97.0% TYPE IV Phosphorus containing stabilizer Appearance colorless transparent liquid Density (20℃) ≥1.03g/cm3 PH value 1.0～2.0 Stabilizing effect on hydrogen peroxide the stability of hydrogen peroxide is i...
-
OEM/ODM Supplier Nylon Experimental - Hydrogen...
Specification TYPE II Stannum containing stabilizer Appearance Light yellow transparent liquid Density (20℃) ≥1.06g/cm3 PH value 1.0～3.0 Stabilizing effect on hydrogen peroxide the stability of hydrogen peroxide is increased from ≥ 90.0% to ≥ 97.0% TYPE IV Phosphorus containing stabilizer Appearance colorless transparent liquid Density (20℃) ≥1.03g/cm3 PH value 1.0～2.0 Stabilizing effect on hydrogen peroxide the stability of hydrogen peroxide is i...
-
Original Factory Hydrothermal Oven - TOP, Tris...
Package Appearance Colorless, odorless, transparent viscous liqui Purity ≥99% Acidity ≤0.1 mgKOH/g Density (20℃)g/cm3 0.924±0.003 Flash Point ≥192℃ Surface tension ≥18 Mn/m Water content ≤0.1% Color( Pt-Co) ≤20 Package Packaged in 200 liter galvanized iron drum, N.W 180 kg/drum; or IBC drum, N.W 930KG. Storage Stored in dry, cool and ventilated warehouse. Packing
-
Factory Making Mini Reactor - Bench Top Reacto...
The reactor can be made of S.S 316, S.S304, Titanium, Hastelloy, etc. It can also be manufactured according to the materials specified by user. The design pressure is 120bar and the working pressure 100bar. The design pressure is 350℃, while working pressure is 300℃. Once the working temperature is over 300℃, the reactor will alarm and the heating process will stop automatically. We can also supply high pressure and high temperature reactors which are available for reaction with pressure hi...
-
OEM China Hydrothermal Synthesis Reactor With C...
The hydrothermal synthesis reactor unit can be used to test the same group of media under different conditions or the different group of media under same conditions. The hydrothermal synthesis reactor unit is composed of cabinet body, rotating system, heating system and control system. The cabinet body is made of stainless steel. The rotating system consists of motor, gear box and rotary support. The control system mainly controls the cabinet temperature and rotating speed. The hydrothermal s...
-
Lowest Price For Pop Pilot Plant - Activated A...
Industry standard Our products conforms to HG/T 3927-2007 Properties of alumina special for hydrogen peroxide Crystal phase: γ-Al2O3 Specification (mm): 7～14 mesh Φ 3～5, Φ4～6, Φ5～7 Exterior: White ball granule Heap density (g/cm3): 0.68-0.75 Strength (N/grain): >50 Surface area (m2/g): 200～260 Pore volume (cm3/g): 0.40～0.46 Large hole (>750A): 0.14 Water absorption (%): >50 Application of activated alumina as adsorbent The main liquids that activated alumina can be dried are: a...
