Leading Manufacturer For Stabilizer For Hydrogen Peroxide Production - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen
Leading Manufacturer For Stabilizer For Hydrogen Peroxide Production - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen Detail:
Industry standard
Our products conforms to HG/T 3927-2007
Properties of alumina special for hydrogen peroxide
Crystal phase: γ-Al2O3
Specification (mm): 7～14 mesh Φ 3～5, Φ4～6, Φ5～7
Exterior: White ball granule
Heap density (g/cm3): 0.68-0.75
Strength (N/grain): >50
Surface area (m2/g): 200～260
Pore volume (cm3/g): 0.40～0.46
Large hole (>750A): 0.14
Water absorption (%): >50
Application of activated alumina as adsorbent
The main liquids that activated alumina can be dried are: aromatic hydrocarbons, polymer olefins, gasoline, kerosene, cyclohexane, propylene, butene, and many halogenated hydrocarbons. When these liquids are in contact with alumina, the two will not react or polymerize. At the same time, the dry liquid does not contain components that are easily adsorbed on the alumina surface and are not easily removed during regeneration.
Factors affecting adsorption performance
1. Particle size: The smaller the particle size, the higher the adsorption capacity, but the smaller the particle size, the lower the particle strength, which affects its service life.
2. Raw water pH value: When the pH value is higher than 5, the lower the pH value, the higher the adsorption capacity of activated alumina.
3. Initial fluorine concentration in raw water: the higher the initial fluorine concentration, the larger the adsorption capacity.
4. The alkalinity of the raw water: the high concentration of bicarbonate in the raw water will reduce the adsorption capacity.
5. Chloride ion and sulfate ion.
6. The influence of arsenic: activated alumina has an adsorption effect on arsenic in water. The accumulation of arsenic on activated alumina causes a decrease in the adsorption capacity of fluoride ions, and makes it difficult to elute arsenic ions during regeneration.
Product detail pictures:
Related Product Guide:
As for competitive selling prices, we believe that you will be searching far and wide for anything that can beat us. We will state with absolute certainty that for such excellent at such charges we are the lowest around for Leading Manufacturer For Stabilizer For Hydrogen Peroxide Production - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen , The product will supply to all over the world, such as: Porto, San Francisco, Manila, Our professional engineering group will always be ready to serve you for consultation and feedback. We are able to also offer you with absolutely free samples to meet your requirements. Finest efforts will likely be produced to give you the ideal service and goods. For anyone who is thinking about our company and merchandise, please contact us by sending us emails or contact us quickly. As a way to know our merchandise and firm. lot more, you can come to our factory to find out it. We'll always welcome guests from all over the world to our business to build company relations with us. Please feel free to get in touch with us for business and we believe we are going to share the top trading practical experience with all our merchants.
By Amy from San Diego - 2018.11.22 12:28
The product classification is very detailed that can be very accurate to meet our demand, a professional wholesaler.
By Ella from Jeddah - 2017.10.13 10:47
Related products
-
New Fashion Design For Neopentyl Glycol NPG Rec...
Specification TYPE II Stannum containing stabilizer Appearance Light yellow transparent liquid Density (20℃) ≥1.06g/cm3 PH value 1.0～3.0 Stabilizing effect on hydrogen peroxide the stability of hydrogen peroxide is increased from ≥ 90.0% to ≥ 97.0% TYPE IV Phosphorus containing stabilizer Appearance colorless transparent liquid Density (20℃) ≥1.03g/cm3 PH value 1.0～2.0 Stabilizing effect on hydrogen peroxide the stability of hydrogen peroxide is i...
-
Hot-Selling Experimental Rectification - DDI, ...
DDI is a unique aliphatic diisocyanate that can be combined with active hydrogen-containing compounds to prepare polymers. It is a long-chain compound with a 36-carbon dimerized fatty acid backbone. The main chain structure gives DDI superior flexibility, water resistance and low toxicity than other aliphatic isocyanates. DDI is a low-viscosity liquid, easily soluble in most polar or non-polar solvents. Because it is an aliphatic isocyanate, it has non-yellowing properties. What’s th...
-
Factory Wholesale Polymer Pilot Reactor - Benc...
The reactor can be made of S.S 316, S.S304, Titanium, Hastelloy, etc. It can also be manufactured according to the materials specified by user. The design pressure is 120bar and the working pressure 100bar. The design pressure is 350℃, while working pressure is 300℃. Once the working temperature is over 300℃, the reactor will alarm and the heating process will stop automatically. We can also supply high pressure and high temperature reactors which are available for reaction with pressure hi...
-
Big Discounting MIL-C-85498 - Ceramic Ball ...
Inert ceramic balls The inert ceramic balls produced by our company mainly use a-Al 2 O 3 superior grade alumina mixed with a small amount of rare earth metal oxides as raw materials. After strict scientific formula, raw material selection, fine grinding, etc. It is processed by a series of suitable production processes such as static pressure forming and sintering. The manufacture, inspection and acceptance of porcelain balls refer to the industry standard “Industrial Porcelain Balls-I...
-
Manufacturer Of Catalytic Hydrothermal Reactor ...
The reactor can be made of S.S 316, S.S304, Titanium, Hastelloy, etc. It can also be manufactured according to the materials specified by user. The design pressure is 120bar and the working pressure 100bar. The design pressure is 350℃, while working pressure is 300℃. Once the working temperature is over 300℃, the reactor will alarm and the heating process will stop automatically. We can also supply high pressure and high temperature reactors which are available for reaction with pressure hi...
-
Europe Style For Stainless Steel Reactor - Hig...
Product description 1. ZIPEN offers HP/HT reactors are applicable for pressure under 350bar and temperature up to 500 ℃. 2. The reactor can be made of S.S310, Titanium, Hastelloy, Zirconium, Monel, Incoloy. 3. Special sealing ring is used according to operational temperature and pressure. 4. A safety valve with rapture disc is equipped on the reactor. the blasting numerical error is small, the instantaneous exhaust speed is fast, and it is safe and reliable. 5. With the electric motor ...
