Hot-Selling High Pressure Reactor Tank - Homogeneous Reactor/Hydrothermal Reaction Rotary Oven – Zipen
Hot-Selling High Pressure Reactor Tank - Homogeneous Reactor/Hydrothermal Reaction Rotary Oven – Zipen Detail:
The Homogeneous Reactor is used on reaction test for the same group of media under different conditions or the different group of media under same conditions.
The homogeneous reactor is composed of cabinet body, rotating parts, heater and controller. The cabinet body is made of stainless steel. The rotating system consists of motor gear box and rotary support. The control system mainly controls the cabinet temperature and rotating speed. The homogeneous reactor used multiple hydrothermal synthesis reactor vessels to test the same group of media under different conditions or the different group of media under same conditions. Due to the rotating shaft, the medium in the reactor vessel is fully stirred, so the reaction speed is fast and reaction is fully and thoroughly, which is better than the simple thermostatic effect. The casing on the stirring rod is equipped with a retainer ring (according to the size of the reaction vessel), can be fixed micro reaction vessel 6,8,10,12, at the same time, can be customized according to user requirements. In general, the cabinet body size is 400*400*450mm, and the inside of the cabinet can be filled with 8 pieces 100ML reactor vessel. The specific size is subject to the customer’s demand.
Technical parameter
| Hydrothermal Synthesis Reactor Unit | |
| Model | ZP-4/6/8/12 |
| Working Voltage | 220×(1±10%)V, AC 50Hz/60Hz |
| Design Temperature | 300℃ |
| Operating Temperature | ≤200℃ (Teflon inner vessel) |
| Temperature Fluctuation | ±0.5℃ |
| Motor Speed | 0-70r/min |
| Material | 304 Stainless Steel |
| Retainer rings | 4/6/8/12 |
| Control System | Side control box |
What’s the Homogeneous Reactor?
Homogeneous Reactor is used on reaction test for the same group of media under different condition or the different group of media under same conditions. It is made of stainless steel and double-toughened glass, the test process is continuously circulated in the close environment, in this case, the temperature in the cabinet becomes equal as well.
Three-dimensional Rotating Shaft
Hydrothermal synthesis reactor
Motor
Our Advantage of Hydrothermal Synthesis Reactor Unit?
1. Our product is made of stainless steel, which can avoid any rust or corrosion.
2. The rotating shaft makes the reaction speed fast, fully and thoroughly, which is better than the simple thermostatic effect.
3. The high quality high temperature resistance handle can avoid any scald efficiently.
Product detail pictures:
Related Product Guide:
We have now sophisticated machines. Our solutions are exported to the USA, the UK and so on, enjoying a great reputation amid consumers for Hot-Selling High Pressure Reactor Tank - Homogeneous Reactor/Hydrothermal Reaction Rotary Oven – Zipen , The product will supply to all over the world, such as: Salt Lake City, Saudi Arabia, Czech republic, After years of development, we have formed strong ability in new product development and strict quality control system to ensure excellent quality and service. With the support of many long term cooperated customers, our products are welcomed all over the world.
By Jacqueline from venezuela - 2018.08.12 12:27
This supplier stick to the principle of "Quality first, Honesty as base", it is absolutely to be trust.
By Bertha from Paris - 2018.12.14 15:26
Related products
-
Factory Supplied Parr Instrument - Activated A...
Industry standard Our products conforms to HG/T 3927-2007 Properties of alumina special for hydrogen peroxide Crystal phase: γ-Al2O3 Specification (mm): 7～14 mesh Φ 3～5, Φ4～6, Φ5～7 Exterior: White ball granule Heap density (g/cm3): 0.68-0.75 Strength (N/grain): >50 Surface area (m2/g): 200～260 Pore volume (cm3/g): 0.40～0.46 Large hole (>750A): 0.14 Water absorption (%): >50 Application of activated alumina as adsorbent The main liquids that activated alumina can be dried are: a...
-
OEM/ODM Manufacturer Polyether Reaction - Poly...
Product Description This system is suitable for continuous reaction of gas-liquid phase materials under high temperature and high pressure. It is mainly used in the exploration test of POP process conditions. Basic process: two ports are provided for gases. One port is nitrogen for safety purge; the other is air as power source of pneumatic valve. The liquid material is accurately metered by an electronic scale and fed into the system by a constant flux pump. The material react firstly i...
-
Hot Selling For Hydrothermal Synthesis Reactor ...
Product description 1. ZIPEN offers HP/HT reactors are applicable for pressure under 350bar and temperature up to 500 ℃. 2. The reactor can be made of S.S310, Titanium, Hastelloy, Zirconium, Monel, Incoloy. 3. Special sealing ring is used according to operational temperature and pressure. 4. A safety valve with rapture disc is equipped on the reactor. the blasting numerical error is small, the instantaneous exhaust speed is fast, and it is safe and reliable. 5. With the electric motor ...
-
Factory Customized HP/HT Reactor - Bench Top R...
The reactor can be made of S.S 316, S.S304, Titanium, Hastelloy, etc. It can also be manufactured according to the materials specified by user. The design pressure is 120bar and the working pressure 100bar. The design pressure is 350℃, while working pressure is 300℃. Once the working temperature is over 300℃, the reactor will alarm and the heating process will stop automatically. We can also supply high pressure and high temperature reactors which are available for reaction with pressure hi...
-
Massive Selection For Ceramic Ball - DDI, CAS:...
DDI is a unique aliphatic diisocyanate that can be combined with active hydrogen-containing compounds to prepare polymers. It is a long-chain compound with a 36-carbon dimerized fatty acid backbone. The main chain structure gives DDI superior flexibility, water resistance and low toxicity than other aliphatic isocyanates. DDI is a low-viscosity liquid, easily soluble in most polar or non-polar solvents. Because it is an aliphatic isocyanate, it has non-yellowing properties. What’s th...
-
Hot-Selling Experimental Rectification - Hydro...
Specification TYPE II Stannum containing stabilizer Appearance Light yellow transparent liquid Density (20℃) ≥1.06g/cm3 PH value 1.0～3.0 Stabilizing effect on hydrogen peroxide the stability of hydrogen peroxide is increased from ≥ 90.0% to ≥ 97.0% TYPE IV Phosphorus containing stabilizer Appearance colorless transparent liquid Density (20℃) ≥1.03g/cm3 PH value 1.0～2.0 Stabilizing effect on hydrogen peroxide the stability of hydrogen peroxide is i...
