Hot Sale Hydrothermal Vessels Reactor - Bench Top Reactor, Floor stand Reactor – Zipen
Hot Sale Hydrothermal Vessels Reactor - Bench Top Reactor, Floor stand Reactor – Zipen Detail:
The reactor can be made of S.S 316, S.S304, Titanium, Hastelloy, etc. It can also be manufactured according to the materials specified by user.
The design pressure is 120bar and the working pressure 100bar. The design pressure is 350℃, while working pressure is 300℃. Once the working temperature is over 300℃, the reactor will alarm and the heating process will stop automatically.
We can also supply high pressure and high temperature reactors which are available for reaction with pressure higher than 100bar, temperature higher than 300℃.
Different volumes are available:
50-300ml, 500ml and 1000ml for bench top magnetic stirred reactor.
500ml, 1000ml and 2000ml for Floor stand magnetic stirred reactor.
What is the feature of the magnetic stirred reactor?
Features
1. Magnetically sealed stirring
2. Bench Top volume: 50ml-1L; Floorstand volume: 500ml-2000ml.
3. Max. temperature: 350℃, Max. pressure: 12MPa
4. Cylinder material: 316 stainless steel (customized: titanium, monel, zirconium, etc.)
5. Control system: Touch screen, collapsible and integrated design.
What is the magnetic stirred reactor used for?
It is suitable for petrochemical, chemical, pharmaceutical, polymer synthesis, metallurgy and other fields. This is the most ideal device for chemical reactions under high temperature and high pressure.
Target customers
Laboratories in universities, research institutes and corporate.
Related experiments
Catalytic reaction, polymerization reaction, supercritical reaction, high-temperature and high-pressure synthesis, hydrogenation reaction, hydrometallurgy, esterification reaction, perfume synthesis, slurry reaction.
Pentafluoroethyl iodide synthesis, ethylene oligomerization, hydrodesulfurization, hydrodenitrogenation, oxide hydrogenolysis, hydrodemetalization, unsaturated hydrocarbon hydrogenation, petroleum hydrocracking, olefin oxidation, aldehyde oxidation, liquid phase oxidation Impurity removal, catalytic coal liquefaction, rubber synthesis, lactic acid polymerization, n-butene isomerization reaction, hydrogen reaction, polyester synthesis reaction, p-xylene oxidation reaction.
Product detail pictures:
Related Product Guide:
We insist over the principle of enhancement of 'High high quality, Efficiency, Sincerity and Down-to-earth working approach' to offer you with superb assistance of processing for Hot Sale Hydrothermal Vessels Reactor - Bench Top Reactor, Floor stand Reactor – Zipen , The product will supply to all over the world, such as: kazakhstan, Karachi, South Africa, Custom orders are acceptable with different quality grade and customer's especial design. We are looking forward to establish the good and successful cooperation in business with long terms from the customers of all over the world.
By Edith from Singapore - 2018.02.08 16:45
Superb technology, perfect after-sales service and efficient work efficiency, we think this is our best choice.
By Carey from Honduras - 2018.11.28 16:25
Related products
-
OEM Supply Hydrothermal Kettle - DDI, CAS: 682...
DDI is a unique aliphatic diisocyanate that can be combined with active hydrogen-containing compounds to prepare polymers. It is a long-chain compound with a 36-carbon dimerized fatty acid backbone. The main chain structure gives DDI superior flexibility, water resistance and low toxicity than other aliphatic isocyanates. DDI is a low-viscosity liquid, easily soluble in most polar or non-polar solvents. Because it is an aliphatic isocyanate, it has non-yellowing properties. What’s th...
-
Renewable Design For Nylon Synthesis Experiment...
Specification TYPE II Stannum containing stabilizer Appearance Light yellow transparent liquid Density (20℃) ≥1.06g/cm3 PH value 1.0～3.0 Stabilizing effect on hydrogen peroxide the stability of hydrogen peroxide is increased from ≥ 90.0% to ≥ 97.0% TYPE IV Phosphorus containing stabilizer Appearance colorless transparent liquid Density (20℃) ≥1.03g/cm3 PH value 1.0～2.0 Stabilizing effect on hydrogen peroxide the stability of hydrogen peroxide is i...
-
Original Factory Hydrothermal Oven - Hydrogen ...
Specification TYPE II Stannum containing stabilizer Appearance Light yellow transparent liquid Density (20℃) ≥1.06g/cm3 PH value 1.0～3.0 Stabilizing effect on hydrogen peroxide the stability of hydrogen peroxide is increased from ≥ 90.0% to ≥ 97.0% TYPE IV Phosphorus containing stabilizer Appearance colorless transparent liquid Density (20℃) ≥1.03g/cm3 PH value 1.0～2.0 Stabilizing effect on hydrogen peroxide the stability of hydrogen peroxide is i...
-
2022 China New Design Polymer Polit - Ceramic ...
Inert ceramic balls The inert ceramic balls produced by our company mainly use a-Al 2 O 3 superior grade alumina mixed with a small amount of rare earth metal oxides as raw materials. After strict scientific formula, raw material selection, fine grinding, etc. It is processed by a series of suitable production processes such as static pressure forming and sintering. The manufacture, inspection and acceptance of porcelain balls refer to the industry standard “Industrial Porcelain Balls-I...
-
Hot Sale Paraxylene Pilot - DDI, CAS: 68239-06...
DDI is a unique aliphatic diisocyanate that can be combined with active hydrogen-containing compounds to prepare polymers. It is a long-chain compound with a 36-carbon dimerized fatty acid backbone. The main chain structure gives DDI superior flexibility, water resistance and low toxicity than other aliphatic isocyanates. DDI is a low-viscosity liquid, easily soluble in most polar or non-polar solvents. Because it is an aliphatic isocyanate, it has non-yellowing properties. What’s th...
-
OEM/ODM Supplier Nylon Experimental - Hydrogen...
Package 25kg/ Kraft paper bag with black PE bag lined or according to your requirement. Storage The products shall be stored in a dry and ventilated warehouse. Specification Appearance yellowish solid flakes Melting Point 109～111 ℃ EAQ content ≥ 98.5 % Benzene-insoluble ≤ 0.05 % Cl content ≤ 40 ppm S content ≤ 5 ppm Fe content ≤ 5 ppm Packing
