Free Sample For Titanium Reaction System - Catalyst evaluation system – Zipen
Free Sample For Titanium Reaction System - Catalyst evaluation system – Zipen Detail:
This system is mainly used for the performance evaluation of palladium catalyst in hydrogenation reaction and the exploration test of process conditions.
Basic process: The system provides two gases, hydrogen and nitrogen, which are respectively controlled by a pressure regulator. The hydrogen is metered and fed by a mass flow controller, and the nitrogen is metered and fed by a rotameter, and then passed into the reactor. The continuous reaction is carried out under the conditions of temperature and pressure set by the user.
Operating characteristics: The pressure stability of the system is precisely controlled by the cooperation of the inlet gas pressure control valve and the vent gas counterbalance valve. Temperature control adopts PID intelligent temperature control meter to control electric heating elements. For the temperature runaway caused by the exotherm in the reaction process, the computer will automatically complete the PID control by regulating the cooling water flow according to the degree of temperature runaway. The whole system integrates temperature, pressure, stirring, flow control, inlet gas pressure regulation, and pressure counterbalance into a cabinet.
The overall dimensions are 500*400*600.
Product Description
The pressure stability of the system is precisely controlled by the cooperation of the inlet gas pressure control valve and the vent gas counterbalance valve; The hydrogen gas flow is accurately measured by Brooks flowmeter, which is equipped with a bypass and a manual micro-control valve; According to the features of hydrogenation reaction, the control of reaction temperature is realized through PID control of the heating furnace and the cooling water flow rate as well as temperature runaway. The whole set of equipment is integrated in an overall frame, easy for installation and operation, safe and reliable.
Technical Specification
| Reaction pressure | 0.3MPa (3 bar) |
| Design pressure | 1.0MPa (10 bar) |
| Reaction temperature | 60℃, accuracy: ±0.5℃ |
| Temperature runaway control | Automatically control the cooling water flow, temperature runaway<2℃ |
| Stirring speed | 0-1500r/min |
| Effective volume | 500ml |
| Inserted filter in reactor | 15～20μm |
| Range of gas mass flow controller | 200SCCM |
| Flow range of Rotameter | 100ml/min |
| Pneumatic cooling water control valve | CV: 0.2 |
Product detail pictures:
Related Product Guide:
Our primary intention should be to offer our clientele a serious and responsible enterprise relationship, delivering personalized attention to all of them for Free Sample For Titanium Reaction System - Catalyst evaluation system – Zipen , The product will supply to all over the world, such as: United Kingdom, Latvia, Milan, We are proud to supply our products to every costumer all around the world with our flexible, fast efficient services and strictest quality control standard which has always approved and praised by customers.
By Victoria from Georgia - 2018.09.29 13:24
This supplier stick to the principle of "Quality first, Honesty as base", it is absolutely to be trust.
By Louise from Switzerland - 2017.12.09 14:01
Related products
-
OEM/ODM China Polymer Reactor - Hydrothermal S...
The hydrothermal synthesis reactor unit can be used to test the same group of media under different conditions or the different group of media under same conditions. The hydrothermal synthesis reactor unit is composed of cabinet body, rotating system, heating system and control system. The cabinet body is made of stainless steel. The rotating system consists of motor, gear box and rotary support. The control system mainly controls the cabinet temperature and rotating speed. The hydrothermal s...
-
Renewable Design For Nylon Synthesis Experiment...
Specification TYPE II Stannum containing stabilizer Appearance Light yellow transparent liquid Density (20℃) ≥1.06g/cm3 PH value 1.0～3.0 Stabilizing effect on hydrogen peroxide the stability of hydrogen peroxide is increased from ≥ 90.0% to ≥ 97.0% TYPE IV Phosphorus containing stabilizer Appearance colorless transparent liquid Density (20℃) ≥1.03g/cm3 PH value 1.0～2.0 Stabilizing effect on hydrogen peroxide the stability of hydrogen peroxide is i...
-
OEM China Parallel Reaction System - Experimen...
Product performance and structural features The material feeding unit is composed of a raw material storage tank with stirring and heating and temperature control, together with Mettler’s weighing module and the precise measurement of a micro-metering advection pump to achieve micro and stable feeding control. The temperature of the rectification unit is achieved by the comprehensive cooperation of preheating, tower bottom temperature control and tower temperature control. The towe...
-
Factory Promotional HT Reactor - Homogeneous R...
The Homogeneous Reactor is used on reaction test for the same group of media under different conditions or the different group of media under same conditions. The homogeneous reactor is composed of cabinet body, rotating parts, heater and controller. The cabinet body is made of stainless steel. The rotating system consists of motor gear box and rotary support. The control system mainly controls the cabinet temperature and rotating speed. The homogeneous reactor used multiple hydrothermal synt...
-
Best-Selling 78-42-2 - Ceramic Ball – Zipen
Inert ceramic balls The inert ceramic balls produced by our company mainly use a-Al 2 O 3 superior grade alumina mixed with a small amount of rare earth metal oxides as raw materials. After strict scientific formula, raw material selection, fine grinding, etc. It is processed by a series of suitable production processes such as static pressure forming and sintering. The manufacture, inspection and acceptance of porcelain balls refer to the industry standard “Industrial Porcelain Balls-I...
-
Massive Selection For Floor Stand Magnetic Stir...
The reactor can be made of S.S 316, S.S304, Titanium, Hastelloy, etc. It can also be manufactured according to the materials specified by user. The design pressure is 120bar and the working pressure 100bar. The design pressure is 350℃, while working pressure is 300℃. Once the working temperature is over 300℃, the reactor will alarm and the heating process will stop automatically. We can also supply high pressure and high temperature reactors which are available for reaction with pressure hi...
