Factory Wholesale High Pressure Reactor Autoclave - Hydrothermal Synthesis Reactors – Zipen
Factory Wholesale High Pressure Reactor Autoclave - Hydrothermal Synthesis Reactors – Zipen Detail:
The hydrothermal synthesis reactor unit can be used to test the same group of media under different conditions or the different group of media under same conditions.
The hydrothermal synthesis reactor unit is composed of cabinet body, rotating system, heating system and control system. The cabinet body is made of stainless steel. The rotating system consists of motor, gear box and rotary support. The control system mainly controls the cabinet temperature and rotating speed. The hydrothermal synthesis reactor unit used multiple hydrothermal synthesis reactor vessels to test the same group of media under different conditions or the different group of media under same conditions. Due to the rotating shaft, the medium in the reactor vessel is fully stirred, so the reaction speed is fast and the reaction is fully and thoroughly, which is better than the simple thermostatic effect.
What’s the features of the stainless steel hydrothermal synthesis reactor unit?
Features
1. Motor Speed: 0-70r/min, Variable frequency.
2. Tank Volume: 10-1000mll.
3. Max. temperature: 300℃.
4. Tank material: 316 stainless steel.
5. Programmed temperature control; Side control box.
This is the most ideal device for chemical reactions under high temperature and high pressure.
Target customers
Laboratories in universities, research institutes, corporate.
What is the Stainless Steel Hydrothermal Synthesis Reactor Unit used for?
Catalytic reaction, polymerization reaction, supercritical reaction, high-temperature and high-pressure synthesis, hydrogenation reaction, hydrometallurgy, esterification reaction, perfume synthesis, slurry reaction Pentafluoroethyl iodide synthesis, ethylene oligomerization, hydrodesulfurization, hydrodenitrogenation, oxide hydrogenolysis, hydrodemetalization, unsaturated hydrocarbon hydrogenation, petroleum hydrocracking, olefin oxidation, aldehyde oxidation, liquid phase oxidation Impurity removal, catalytic coal liquefaction, rubber synthesis, lactic acid polymerization, n-butene isomerization reaction, hydrogen reaction, polyester synthesis reaction, p-xylene oxidation reaction.
Our advantage of stainless-steel hydrothermal synthesis reactor unit?
1. The reactor is made of stainless-steel with high corrosion resistance for low maintenance cost.
2. Different vessels are available.
3. Perfect for experiments in universities, research institutes, corporates.
Product detail pictures:
Related Product Guide:
"Quality first, Honesty as base, Sincere service and mutual profit" is our idea, in order to develop continuously and pursue the excellence for Factory Wholesale High Pressure Reactor Autoclave - Hydrothermal Synthesis Reactors – Zipen , The product will supply to all over the world, such as: Jordan, Chile, Nigeria, With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in beauty and other industries. Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs.
By Nelly from Germany - 2018.09.29 17:23
The enterprise has a strong capital and competitive power, product is sufficient, reliable, so we have no worries on cooperating with them.
By Yannick Vergoz from Lebanon - 2018.09.23 17:37
Related products
-
Special Design For 2-Ethyl-Anthraquinone - DDI...
DDI is a unique aliphatic diisocyanate that can be combined with active hydrogen-containing compounds to prepare polymers. It is a long-chain compound with a 36-carbon dimerized fatty acid backbone. The main chain structure gives DDI superior flexibility, water resistance and low toxicity than other aliphatic isocyanates. DDI is a low-viscosity liquid, easily soluble in most polar or non-polar solvents. Because it is an aliphatic isocyanate, it has non-yellowing properties. What’s th...
-
Factory Supply Small Scale Rectification - Hyd...
Package 25kg/ Kraft paper bag with black PE bag lined or according to your requirement. Storage The products shall be stored in a dry and ventilated warehouse. Specification Appearance yellowish solid flakes Melting Point 109～111 ℃ EAQ content ≥ 98.5 % Benzene-insoluble ≤ 0.05 % Cl content ≤ 40 ppm S content ≤ 5 ppm Fe content ≤ 5 ppm Packing
-
Good Quality Tubular Reactor - Homogeneous Rea...
The Homogeneous Reactor is used on reaction test for the same group of media under different conditions or the different group of media under same conditions. The homogeneous reactor is composed of cabinet body, rotating parts, heater and controller. The cabinet body is made of stainless steel. The rotating system consists of motor gear box and rotary support. The control system mainly controls the cabinet temperature and rotating speed. The homogeneous reactor used multiple hydrothermal synt...
-
Professional China Experimental Rectification S...
DDI is a unique aliphatic diisocyanate that can be combined with active hydrogen-containing compounds to prepare polymers. It is a long-chain compound with a 36-carbon dimerized fatty acid backbone. The main chain structure gives DDI superior flexibility, water resistance and low toxicity than other aliphatic isocyanates. DDI is a low-viscosity liquid, easily soluble in most polar or non-polar solvents. Because it is an aliphatic isocyanate, it has non-yellowing properties. What’s th...
-
Manufacturer Of Catalytic Hydrothermal Reactor ...
Product description 1. ZIPEN offers HP/HT reactors are applicable for pressure under 350bar and temperature up to 500 ℃. 2. The reactor can be made of S.S310, Titanium, Hastelloy, Zirconium, Monel, Incoloy. 3. Special sealing ring is used according to operational temperature and pressure. 4. A safety valve with rapture disc is equipped on the reactor. the blasting numerical error is small, the instantaneous exhaust speed is fast, and it is safe and reliable. 5. With the electric motor ...
-
Special Price For 200l Pilot Reactor - Bench T...
The reactor can be made of S.S 316, S.S304, Titanium, Hastelloy, etc. It can also be manufactured according to the materials specified by user. The design pressure is 120bar and the working pressure 100bar. The design pressure is 350℃, while working pressure is 300℃. Once the working temperature is over 300℃, the reactor will alarm and the heating process will stop automatically. We can also supply high pressure and high temperature reactors which are available for reaction with pressure hi...
