Experimental nitrile latex reaction system
Basic Process
Butadiene in the raw material tank is prepared in advance. At the beginning of the test, the system is vacuumed and replaced with nitrogen to ensure that the entire system is oxygen-free and water-free. Prepared with various liquid-phase raw materials and initiators and other auxiliary agents are added to the metering tank, and then the butadiene was transferred to the metering tank.
Open the oil bath circulation of the reactor, and the temperature in the reactor is controlled at 75°C. The valve is manually opened to control the dripping of raw materials. The flow is controlled by the opening of the feed valve and the level gauge of the metering tank.
Main Specification
1. 15L reactor
Speed: 0~750 rpm
Mixing: 0.75KW explosion-proof
Upgrade: 370W explosion-proof
Wrench M16
2. Rapture Disc
Temperature 200℃, pressure 19Bar
3. Platinum resistance PT100
Maximum working temperature 200℃ φ3*500
4. Three-piece welded ball valve
DN20, temperature range -25~200℃, pressure resistance 5Bar
Related products
-
Experimental PX continuous oxidation system
Product Description The system adopts modular design concept, and all the equipment and pipelines are integrated in the frame. It includes three parts: feeding unit, oxidation reaction unit, and separation unit. Using advanced control technology, it can meet the special requirements of complex reaction system, high temperature and high pressure, explosiveness, strong corrosion, multiple constraint condit...
-
Experimental rectification system
Product performance and structural features The material feeding unit is composed of a raw material storage tank with stirring and heating and temperature control, together with Mettler's weighing module and the precise measurement of a micro-metering advection pump to achieve micro and stable feeding control. The temperature of the rectification unit is achieved by the comprehensive cooperation of prehe...
-
Polymer polyols (POP) reaction system
Product Description This system is suitable for continuous reaction of gas-liquid phase materials under high temperature and high pressure. It is mainly used in the exploration test of POP process conditions. Basic process: two ports are provided for gases. One port is nitrogen for safety purge; the other is air as power source of pneumatic valve. The liquid material is accurately metered by an electroni...
-
Experimental Nylon reaction system
Product Description The reactor is supported on the aluminum alloy frame. The reactor adopts a flanged structure with a reasonable structure and a higher degree of standardization. It can be used for chemical reactions of various materials under high temperature and high pressure. It is especially suitable for stirring and reaction of high-viscosity materials. 1. Material: The reactor is mainly made of S...
-
Pilot Reactor for PX Oxidation continuous exper...
Basic process: Preheat the system, and purge it with nitrogen until the oxygen content of the outlet tail gas is zero. Add liquid feed (acetic acid and catalyst) into the system and continuously heat the system to the reaction temperature. Add pure air, continue heating until the reaction is triggered, and start insulation. When the liquid level of reactants reaches the required height, start to control the discharge, and control the discharge speed to keep the liquid level stable. In the who...
-
Catalyst evaluation system
This system is mainly used for the performance evaluation of palladium catalyst in hydrogenation reaction and the exploration test of process conditions. Basic process: The system provides two gases, hydrogen and nitrogen, which are respectively controlled by a pressure regulator. The hydrogen is metered and fed by a mass flow controller, and the nitrogen is metered and fed by a rotameter, and then passed into the reactor. The continuous reaction is carried out under...
