2022 Latest Design 50l Polymer Resin Pilot Reactor - Homogeneous Reactor/Hydrothermal Reaction Rotary Oven – Zipen
2022 Latest Design 50l Polymer Resin Pilot Reactor - Homogeneous Reactor/Hydrothermal Reaction Rotary Oven – Zipen Detail:
The Homogeneous Reactor is used on reaction test for the same group of media under different conditions or the different group of media under same conditions.
The homogeneous reactor is composed of cabinet body, rotating parts, heater and controller. The cabinet body is made of stainless steel. The rotating system consists of motor gear box and rotary support. The control system mainly controls the cabinet temperature and rotating speed. The homogeneous reactor used multiple hydrothermal synthesis reactor vessels to test the same group of media under different conditions or the different group of media under same conditions. Due to the rotating shaft, the medium in the reactor vessel is fully stirred, so the reaction speed is fast and reaction is fully and thoroughly, which is better than the simple thermostatic effect. The casing on the stirring rod is equipped with a retainer ring (according to the size of the reaction vessel), can be fixed micro reaction vessel 6,8,10,12, at the same time, can be customized according to user requirements. In general, the cabinet body size is 400*400*450mm, and the inside of the cabinet can be filled with 8 pieces 100ML reactor vessel. The specific size is subject to the customer’s demand.
Technical parameter
| Hydrothermal Synthesis Reactor Unit | |
| Model | ZP-4/6/8/12 |
| Working Voltage | 220×(1±10%)V, AC 50Hz/60Hz |
| Design Temperature | 300℃ |
| Operating Temperature | ≤200℃ (Teflon inner vessel) |
| Temperature Fluctuation | ±0.5℃ |
| Motor Speed | 0-70r/min |
| Material | 304 Stainless Steel |
| Retainer rings | 4/6/8/12 |
| Control System | Side control box |
What’s the Homogeneous Reactor?
Homogeneous Reactor is used on reaction test for the same group of media under different condition or the different group of media under same conditions. It is made of stainless steel and double-toughened glass, the test process is continuously circulated in the close environment, in this case, the temperature in the cabinet becomes equal as well.
Three-dimensional Rotating Shaft
Hydrothermal synthesis reactor
Motor
Our Advantage of Hydrothermal Synthesis Reactor Unit?
1. Our product is made of stainless steel, which can avoid any rust or corrosion.
2. The rotating shaft makes the reaction speed fast, fully and thoroughly, which is better than the simple thermostatic effect.
3. The high quality high temperature resistance handle can avoid any scald efficiently.
Product detail pictures:
Related Product Guide:
We're going to dedicate ourselves to offering our esteemed shoppers with the most enthusiastically considerate solutions for 2022 Latest Design 50l Polymer Resin Pilot Reactor - Homogeneous Reactor/Hydrothermal Reaction Rotary Oven – Zipen , The product will supply to all over the world, such as: Bangalore, Mexico, Hungary, What You Need Is What We Pursue.We are sure our products will bring you first class quality.And now sincerely hope to promote partner friendship with you from all over the world. Let's joint hands to cooperate with mutual benefits!
By Annie from Estonia - 2018.12.30 10:21
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Joa from Provence - 2017.08.28 16:02
Related products
-
Professional Design Raw Material For Hydrogen P...
Package 25kg/ Kraft paper bag with black PE bag lined or according to your requirement. Storage The products shall be stored in a dry and ventilated warehouse. Specification Appearance yellowish solid flakes Melting Point 109～111 ℃ EAQ content ≥ 98.5 % Benzene-insoluble ≤ 0.05 % Cl content ≤ 40 ppm S content ≤ 5 ppm Fe content ≤ 5 ppm Packing
-
Personlized Products Ceramic Ball For Hydrogen ...
Specification TYPE II Stannum containing stabilizer Appearance Light yellow transparent liquid Density (20℃) ≥1.06g/cm3 PH value 1.0～3.0 Stabilizing effect on hydrogen peroxide the stability of hydrogen peroxide is increased from ≥ 90.0% to ≥ 97.0% TYPE IV Phosphorus containing stabilizer Appearance colorless transparent liquid Density (20℃) ≥1.03g/cm3 PH value 1.0～2.0 Stabilizing effect on hydrogen peroxide the stability of hydrogen peroxide is i...
-
OEM Factory For Polyether Experimental - DDI, ...
DDI is a unique aliphatic diisocyanate that can be combined with active hydrogen-containing compounds to prepare polymers. It is a long-chain compound with a 36-carbon dimerized fatty acid backbone. The main chain structure gives DDI superior flexibility, water resistance and low toxicity than other aliphatic isocyanates. DDI is a low-viscosity liquid, easily soluble in most polar or non-polar solvents. Because it is an aliphatic isocyanate, it has non-yellowing properties. What’s th...
-
Short Lead Time For Hydrogen Peroxide - Activa...
Industry standard Our products conforms to HG/T 3927-2007 Properties of alumina special for hydrogen peroxide Crystal phase: γ-Al2O3 Specification (mm): 7～14 mesh Φ 3～5, Φ4～6, Φ5～7 Exterior: White ball granule Heap density (g/cm3): 0.68-0.75 Strength (N/grain): >50 Surface area (m2/g): 200～260 Pore volume (cm3/g): 0.40～0.46 Large hole (>750A): 0.14 Water absorption (%): >50 Application of activated alumina as adsorbent The main liquids that activated alumina can be dried are: a...
-
High Reputation Nitrile Latex Experiment - Hyd...
Specification TYPE II Stannum containing stabilizer Appearance Light yellow transparent liquid Density (20℃) ≥1.06g/cm3 PH value 1.0～3.0 Stabilizing effect on hydrogen peroxide the stability of hydrogen peroxide is increased from ≥ 90.0% to ≥ 97.0% TYPE IV Phosphorus containing stabilizer Appearance colorless transparent liquid Density (20℃) ≥1.03g/cm3 PH value 1.0～2.0 Stabilizing effect on hydrogen peroxide the stability of hydrogen peroxide is i...
-
Competitive Price For Unsaturated Polyester Res...
The reactor can be made of S.S 316, S.S304, Titanium, Hastelloy, etc. It can also be manufactured according to the materials specified by user. The design pressure is 120bar and the working pressure 100bar. The design pressure is 350℃, while working pressure is 300℃. Once the working temperature is over 300℃, the reactor will alarm and the heating process will stop automatically. We can also supply high pressure and high temperature reactors which are available for reaction with pressure hi...
