• zipen

2022 High Quality Nylon Experimental Unit - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Being supported by an highly developed and skilled IT group, we could offer you technical support on pre-sales & after-sales support for Nitrile Latex Experimental System, Continuous Stirred Tank Reactor, Tubular Reactor, Your inquiry will be highly welcomed and a win-win prosperous development are what we are expecting.
2022 High Quality Nylon Experimental Unit - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen Detail:

Industry standard

Our products conforms to HG/T 3927-2007
Properties of alumina special for hydrogen peroxide
Crystal phase: γ-Al2O3
Specification (mm): 7~14 mesh Φ 3~5, Φ4~6, Φ5~7
Exterior: White ball granule
Heap density (g/cm3): 0.68-0.75
Strength (N/grain): >50
Surface area (m2/g): 200~260
Pore volume (cm3/g): 0.40~0.46
Large hole (>750A): 0.14
Water absorption (%): >50

Application of activated alumina as adsorbent

The main liquids that activated alumina can be dried are: aromatic hydrocarbons, polymer olefins, gasoline, kerosene, cyclohexane, propylene, butene, and many halogenated hydrocarbons. When these liquids are in contact with alumina, the two will not react or polymerize. At the same time, the dry liquid does not contain components that are easily adsorbed on the alumina surface and are not easily removed during regeneration.

Factors affecting adsorption performance

1. Particle size: The smaller the particle size, the higher the adsorption capacity, but the smaller the particle size, the lower the particle strength, which affects its service life.
2. Raw water pH value: When the pH value is higher than 5, the lower the pH value, the higher the adsorption capacity of activated alumina.
3. Initial fluorine concentration in raw water: the higher the initial fluorine concentration, the larger the adsorption capacity.
4. The alkalinity of the raw water: the high concentration of bicarbonate in the raw water will reduce the adsorption capacity.
5. Chloride ion and sulfate ion.
6. The influence of arsenic: activated alumina has an adsorption effect on arsenic in water. The accumulation of arsenic on activated alumina causes a decrease in the adsorption capacity of fluoride ions, and makes it difficult to elute arsenic ions during regeneration.


Product detail pictures:

2022 High Quality Nylon Experimental Unit - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen detail pictures

2022 High Quality Nylon Experimental Unit - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen detail pictures

2022 High Quality Nylon Experimental Unit - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen detail pictures

2022 High Quality Nylon Experimental Unit - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen detail pictures

2022 High Quality Nylon Experimental Unit - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen detail pictures

2022 High Quality Nylon Experimental Unit - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen detail pictures

2022 High Quality Nylon Experimental Unit - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen detail pictures

2022 High Quality Nylon Experimental Unit - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen detail pictures


Related Product Guide:

We insist over the principle of enhancement of 'High high quality, Efficiency, Sincerity and Down-to-earth working approach' to offer you with superb assistance of processing for 2022 High Quality Nylon Experimental Unit - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen , The product will supply to all over the world, such as: Cyprus, Qatar, Las Vegas, We focus on providing service for our clients as a key element in strengthening our long-term relationships. Our continual availability of high grade products in combination with our excellent pre-sale and after-sales service ensures strong competitiveness in an increasingly globalized market.
  • This is a very professional and honest Chinese supplier, from now on we fell in love with the Chinese manufacturing.
    5 Stars By Albert from Slovenia - 2018.10.09 19:07
    It's really lucky to find such a professional and responsible manufacturer, the product quality is good and delivery is timely, very nice.
    5 Stars By Frank from Austria - 2017.09.29 11:19
    Write your message here and send it to us

    Related products

    • Hot New Products Polymer Polyol Pilot - DDI, CAS: 68239-06-5 Dimeryl Diisocyanate, Dimeryl-di- isocyanate – Zipen

      Hot New Products Polymer Polyol Pilot - DDI, C...

      DDI is a unique aliphatic diisocyanate that can be combined with active hydrogen-containing compounds to prepare polymers. It is a long-chain compound with a 36-carbon dimerized fatty acid backbone. The main chain structure gives DDI superior flexibility, water resistance and low toxicity than other aliphatic isocyanates. DDI is a low-viscosity liquid, easily soluble in most polar or non-polar solvents. Because it is an aliphatic isocyanate, it has non-yellowing properties. What’s th...

    • High Quality For Small High Pressure Reactors For Lab - Hydrothermal Synthesis Reactors – Zipen

      High Quality For Small High Pressure Reactors F...

      The hydrothermal synthesis reactor unit can be used to test the same group of media under different conditions or the different group of media under same conditions. The hydrothermal synthesis reactor unit is composed of cabinet body, rotating system, heating system and control system. The cabinet body is made of stainless steel. The rotating system consists of motor, gear box and rotary support. The control system mainly controls the cabinet temperature and rotating speed. The hydrothermal s...

    • China New Product Trioctyl Phosphate - Hydrogen Peroxide Stabilizer – Zipen

      China New Product Trioctyl Phosphate - Hydroge...

      Specification TYPE II Stannum containing stabilizer Appearance Light yellow transparent liquid Density (20℃)  ≥1.06g/cm3 PH value  1.0~3.0 Stabilizing effect on hydrogen peroxide   the stability of hydrogen peroxide is increased from ≥ 90.0% to ≥ 97.0% TYPE IV Phosphorus containing stabilizer Appearance colorless transparent liquid Density (20℃)  ≥1.03g/cm3 PH value  1.0~2.0 Stabilizing effect on hydrogen peroxide   the stability of hydrogen peroxide is i...

    • Professional Design Polymer Reactor Tank - Homogeneous Reactor/Hydrothermal Reaction Rotary Oven – Zipen

      Professional Design Polymer Reactor Tank - Hom...

      The Homogeneous Reactor is used on reaction test for the same group of media under different conditions or the different group of media under same conditions. The homogeneous reactor is composed of cabinet body, rotating parts, heater and controller. The cabinet body is made of stainless steel. The rotating system consists of motor gear box and rotary support. The control system mainly controls the cabinet temperature and rotating speed. The homogeneous reactor used multiple hydrothermal synt...

    • Low MOQ For Activated Alumina Ball - Activated Alumina for H2O2 production, CAS#: 1302-74-5, Activated Alumina – Zipen

      Low MOQ For Activated Alumina Ball - Activated...

      Industry standard Our products conforms to HG/T 3927-2007 Properties of alumina special for hydrogen peroxide Crystal phase: γ-Al2O3 Specification (mm): 7~14 mesh Φ 3~5, Φ4~6, Φ5~7 Exterior: White ball granule Heap density (g/cm3): 0.68-0.75 Strength (N/grain): >50 Surface area (m2/g): 200~260 Pore volume (cm3/g): 0.40~0.46 Large hole (>750A): 0.14 Water absorption (%): >50 Application of activated alumina as adsorbent The main liquids that activated alumina can be dried are: a...

    • Factory Cheap Hot Hydrogenation - TOP, Tris(2-ethylhexyl) Phosphate, CAS# 78-42-2, Trioctyl Phosphate – Zipen

      Factory Cheap Hot Hydrogenation - TOP, Tris(2-...

      Package Appearance Colorless, odorless, transparent viscous liqui Purity ≥99% Acidity ≤0.1 mgKOH/g Density (20℃)g/cm3 0.924±0.003 Flash Point  ≥192℃ Surface tension ≥18 Mn/m Water content ≤0.1% Color( Pt-Co) ≤20 Package Packaged in 200 liter galvanized iron drum, N.W 180 kg/drum; or IBC drum, N.W 930KG. Storage Stored in dry, cool and ventilated warehouse. Packing